• Protects against Water & Oil spillages
• Enhances & Intensifies Natural Colour                
• Invisible coating
• Low Odour
• Allows Natural Stone to Breath
• Easy to Use
• Contains Natural Plant Extracts
• NEW Advanced Resin-Technology™

A totally new and unique professional Colour Enhancing Impregnator, for greatly enhancing the colours in natural and manmade tiles.  Using our New Advanced Resin-Technology™ it produces an invisible, highly protective shield both within the stone and on the surface, helping to protect against both water & oil based spills.

Colour Enhancing Impregnator uses natural oils and pigments to intensify and enhance the stones natural beauty and helps prevent staining from water and oil based spills.

With its New “Advanced Resin-Technology”™, Colour Enhancing Impregnator produces an invisible protective shield, both in the capillaries and on the surface of the tiles, which helps prevent tiles from becoming stained by repelling daily dirt and grime, making cleaning and maintenance considerably easier, helping to prevent premature replacement.

Colour Enhancing Impregnator can be used on terrazzo, travertine, sandstone, limestone, brick sets, York stone, amalgamated stone, slate, un-glazed ceramic tiles.  Particularly useful in kitchens, utility areas, bathrooms, shower rooms, dining rooms and all other areas where spillages may occur.

PLEASE NOTE: Do not use Colour Enhancing Impregnator if applying Professional Slate Sealer, or any other sealer.

COVERAGE:  Approx. 5-8 sq mtrs per litre on highly absorbent surfaces; up to 15 sq mtrs on polished surfaces and up to 35 sq mtrs on very dense stones.  

PRODUCT ADVICE:  Ensure under floor heating is turned off and allow floor to cool prior to application.  Test product for any colour change in an inconspicuous area before use.

On very porous surfaces, may be re-applied several times - Allow each coat to dry before applying additional coats

IMPORTANT:  On polished surfaces; leave 5 - 10 minutes and wipe off, re-apply if required. DO NOT allow product to dry without wiping off.

____________________________________________________________________________________

DIRECTIONS FOR USE:  Invert container before use - Ensure the area to be treated is clean and free from dust and dirt. 

Using a clean dry cloth, applicator, sponge, brush or roller; apply a thin and even coat over the area to be treated, wait 30 minutes, and apply a second application, wait until most of the product has been absorbed, and remove any excess product with a clean dry cloth; buff up and polish areas with a clean cloth, removing any residue.

____________________________________________________________________________________

DRYING TIME:  May vary from floor to floor; product should be touch dry after 2-3 hours, and fully cured within 24-36hours

MAINTENANCE:  Maintenance of your floor should be undertaken at regular intervals.  To maintain your floor after using Colour Enhancing Impregnator, use Professional Care & Maintainer.

TECHNICAL ADVICE:  For further product advice call free 0800 695 0823 or visit www.stonecareuk.co.uk. 

For Nu-Life Stone Care restoration, cleaning and maintenance services call free 0800 695 0824 or visit www.nulifestonecare.co.uk.

SAFETY PRECAUTIONS:  Use only in a well ventilated areas; wear appropriate safety gloves, eye protection and respirator when using this product. In confined areas where adequate ventilation is not available, respirators or masks must be worn.

Click here to download your Colour Enhancing Impregnator information sheet