If you would like to express your interest in becoming a distributor please Click here
Natural Stone Sealer can be used on most Natural Stones. Such as, Terrazzo, Travertine, Sandstone, Limestone and Brick sets, Quarry tiles, un-polished Marble and Granite.
Whether you're a Professional or enthusiastic DIYer, you'll be amazed at the ease of application and incredible speed of the product bonding to the stone in minutes. None of this standing around for hours waiting for the sealer to dry.
Using the latest Advanced Resin-Technology™, Natural Stone Sealer contains a unique blend of Acrylic Resin and Co-polymers (that's the techie stuff) to develope the incredibly unique, strong and durable protective bonded seal to the stone.
You'll find this protective, hard wearing, Stone Sealer not only seals, it also enhances the natural colours in the stone and allows it to breathe naturally, which assists greatly in keeping the surface, free from dirt and grease build up, making your daily cleaning and maintenance, practically effortless.
If you're looking for high gloss finish, apply Natural Stone Gloss.
COVERAGE: Approx. 10 sq mtrs per litre on rough or highly absorbent stone; up to 25 sq mtrs on less absorbent stone
PRODUCT ADVICE: Not For Outside Use
Ensure under floor heating is turned off and cooled prior to application to prevent premature drying. Test product for suitable colour change or enhancement on a spare tile or in an inconspicuous area.
DIRECTION FOR USE: Invert container before use - The surface to be treated must be clean, free from any residues, dust and dirt. If required, use Wax & Residue Remover prior to application.
Dependant on stone type; apply an even coat of 40-100ml per sq metre, using natural pad applicator, sponge, mop or roller. Allow to dry before applying a second or third coat. Ensure to apply in opposite directions. Wipe off any spills. Do not rush the application.
If air bubbles appear, remove by passing your applicator slowly over the areas affected. For a high gloss finish apply a minimum of 3-4 coats of Natural Stone Gloss.
DRYING TIME: May vary from floor to floor; product should be touch dry within 30 to 60 minutes in-between coats, and fully cured within 6-12 hours. Allow 6-12 hours before standing furniture back on the treated floor.
MAINTENANCE: To ensure the durability and year round “new look” of your floor, maintain on a daily basis using Professional Care & Maintainer.
TECHNICAL ADVICE: For further product advice call free 0800 695 0823 or visit www.stonecareuk.co.uk.
For Nu-Life Stone Care Restoration, Cleaning and Maintenance services call free 0800 695 0824 or visit www.nulifefloorcare.co.uk.
SAFETY PRECAUTIONS: Protective gloves should be worn when using this product. Avoid contact with eyes; Ensure all spills, and non treated areas are thoroughly rinsed with clean fresh water. Use in well ventilated areas