• Enhances Natural Colour
• Helps to Prevent Staining                
• Invisible coating
• Low Odour
• Allows Natural Stone to Breath
• Easy to Use
• Contains Natural Plant Extract

A Specialist Colour Enhancer for enhancing Natural Slate.  Enhances & intensifies the tiles natural colour.  Also helps to protect staining from water based spills.

Specialist Slate Enhancer uses natural oils and pigments to intensify and enhance the stones natural beauty.  Specialist Slate Enhancer will help prevent tiles becoming stained from water based spills.  Will also repel daily dirt and grime, making cleaning and maintenance considerably easier, lengthening the expected lifespan of the tiles.

Specialist Slate Enhancer can also be used on Riven, Rough and multi-coloured slate including Chinese, Indian and Welsh.  Also sandstone, limestone, brick sets, and un-glazed Ceramic tiles.

PLEASE NOTE:  For full impregnation we recommend using Colour Enhancing Impregnator.

COVERAGE:  Approx. 5-10 sq metres per litre on highly absorbent slate; up to 30 sq metres on very dense slate.

PRODUCT ADVICE:  Ensure under floor heating is turned off and allow floor to cool prior to application.  Test product for any colour change in an inconspicuous area before use.

Allow each coat to dry before applying additional coats.

____________________________________________________________________________________

DIRECTIONS FOR USE:  Invert container before use - The surface to be treated must be clean, free from any residues, dust and dirt. If required, use  Wax & Residue Remover prior to application.

Dependant on slate type; apply an even coat 30-200 ml per sq metre, using a clean dry cloth, applicator, sponge, mop or roller. 

Allow to dry before applying a second or third coat.  Ensure to apply in opposite directions. Wipe off any spills. Do not rush the application. 

Wait until most of the product has been absorbed, and remove any excess product with a clean dry cloth.; buff up areas with a clean cloth

Use Colour Enhancing Impregantor applied by cloth to to clean or remove any excess product.

____________________________________________________________________________________

DRYING TIME:  May vary from floor to floor; product should be touch dry after 2-6 hours, and fully cured within 12-24 hours.  Allow 6-12 hours before standing furniture back on the treated floor.

MAINTENANCE:  To ensure the durability and “new look” of your floor, maintain on a daily basis using Professional Care & Maintainer.  Enhancer should be reapplied at regular intervals.

TECHNICAL ADVICE:  For further product advice call free 0800 695 0823 or visit www.stonecareuk.co.uk. 

For Nu-Life Stone Care restoration, cleaning and maintenance services call free 0800 695 0824 or visit www.nulifestonecare.co.uk.

SAFETY PRECAUTIONS:  Use appropriate safety gloves, eye protection and respirator when using this product. Use only in well ventilated areas.

"Click here to download your Specialist Slate Enhancer information sheet"